LIAN LI TOOLBOX PC BUILD SERIES

I figured it was better to post some data, rather than just saying 'my performance is okay.' I've occasionally seen CPU temps in the 60s when gaming, and GPU temps will get in the 70s, but I haven't seen 80 yet. just some of the stuff I had available to post. (20x170, Vcore 1.20) Temps after Prime 95 / Using the Real Temp 2.90 Sensor Test at 3.4 GHz showed 57 degrees max: Max Temps after 3DMark06 run, again 55 on the CPU, 65 on the GPUs - fan only at 40% While this was a short run, this is quite typical even after several hours of testing (OCCT Linpack, Prime 95, Orthos, gaming): Temps at load - max temp was 55 degrees C. Temps at idle - all stock/auto settings - memory timings input manually: Note that ambient temps were between 23-24 degrees C during the following runs.

Just saying it performs better than I expected, and meets my needs. Please realize I am not saying this case is perfect for an overclocking maniac or hardcore 24/7 gamer. Here's some data I've collected since I've been running this system. Video Cards are EVGA GTX 260 Core 216, 55nm x 2ДЇan Controller is a Scythe Kaze Master AceДЄnd, in case you're wondering why I didn't remove the QC sticker, it just happens to be my husband's birthday, so I kept it for luck I did use an extender for my 8-pin power connector to get a little more flexibility with hiding the cable. The top and sides are lined with noise dampening material.ДЄnother view of the innards. Easy to hide everything behind the motherboard tray. this is without drilling any holes or doing any sleeving. one at the bottom is stock, and I added the second one above the DVD drive (it came with the case for GPU cooling, but I didn't really see much cooling with it in that location). There are two 140mm fans for front intake.

Д«asic Silver Box - lightly brushed anodized finish, typical Lian Li quality This case has exceeded my expectations with respect to noise control, air flow, and appearance. But, my conscience got the better of me, and I did some work on the cables last night - at least enough so I'm not embarrassed to share some photos. Originally I just sort of threw everything together and closed the door. I didn't take pics of the bare case, as I wasn't planning on posting a work log - they are available in the link above if you're interested. which is probably why it's not too popular - and many people don't want a door.

LIAN LI TOOLBOX PC BUILD SERIES

It's from Lian Li's Silent Series and is marketed as a midtower, but it's plenty large. I came across the Lian Li PC-A20, but could find little info on it. (Normal desks are usually around 700-750mm, but I guess Lian Li had go taller, to still have adequate leg room.Was looking for a case to air cool an i7 / 920 build with the main criteria being noise control, decent air flow, potential room for future water cooling, and it needed to be 'mature' (as in, rather boring - no bright lights, no fancy windows).

The DK-01 and DK-02 are both quite tall, at 805mm (2.64 ft), and can be adjusted to 835mm. There is, however, only a single slim-line 5.25-inch optical drive slot - even on the two-motherboard DK-02. ThereвЂ™s plenty of space inside for full-length graphics cards, up to 10 expansion slots, and more 3.5- and 2.5-inch drive bays than you can ever need. All three cases have the usual Lian Li details, such as hot-swap hard drive caddies, rounded edges that wonвЂ™t cut your fingers, and thumbscrews throughout. They both have a keyboard shelf, and tons of 120mm system fans (7 and 8 respectively) venting to the bottom and back of the chassis. The DK-01 has space for a single motherboard (ATX or smaller), while the DK-02 has space for two motherboards (1x ATX-or-smaller + 1x mini-ITX). All three desks feature Lian LiвЂ™s customary all-aluminium construction (with iron legs), a tempered glass worktop, and a slide-out rack that holds all of yourВ computer hardware.

Lian li toolbox pc build